|
| |
|
Accessory Die Kit (925)
|
 |
 |
 |
Item No.
925
Weight &
No. of Ctns
5 |
Description
925A - Large Coils 3/4", 7/8", 1", 1 1/4"
925B - 2" Solid Ribbon
925C - 3" Solid Ribbon
925D - 1 1/2" Hollow Round
925E - 2 1/2" Hollow Round
925F - 1 1/2" Hollow Square
925G - 2 1/2" Hollow Square
925H - 1 1/2" Hollow Hexagon
925J - 2 1/2" Hollow Hexagon
925DM - Die Mask (Neoprene)
957 - Stainless Steel Brace
*This Set and #915 are included in every Stainless Steel
Extruder Pkg. |
Price
$175.99
|
|
925A |
925B |
925C |
 |
 |
 |
| 925D |
925E |
925F |
 |
 |
 |
* If you would
like to order single dies from this set please call 1-800-231-7896 |
|
| 925G |
925H |
925J |
| |
 |
 |
| |
925DM |
957 |
Key Benefits
- 1/2" Thick HDPE Polyethylene Plastic Dies.
- No Rusting or Oxidation
- CNC Machined for Exact Shapes & Sizes
The 4" extruder dies are made of 1/2" HDPE (High Density
polyethylene). Which is extremely wear-resistant and completely
non-contaminating. The top edge of the die cavity is beveled to compact the clay
as it passes through, giving a crisp, more solid extrusion. In the hollow dies,
there is a bevel on both the interior and exterior portions under each side of
the bracket (which holds the center of the hollow dies) that helps the extrusion
to "heal" after is has been cut apart by the bracket. This bracket fits into a
slot machined into the top of the hollow die and is held in place by the barrel
of the extruder. If a hollow die is mounted in place, the center part of the die
is in exactly the right place and the wall thickness will automatically be even
all the way around. In general, the walls of extrusions 3-1/2 inches OD or less
are 1/4 inch thick, while larger pieces have 5/16 inch walls. We have a
selection of stock 4? dies available & custom dies are quickly made and
inexpensive.
|
